Dohan
Status: In trial
Draw and edit vector art: logos, labels and shapes.

About this app
Dohan draws with points and lines (paths). Instead of colouring dots like a photo, it remembers the shape ("a curve from here to there"), so edges stay clean at any size. Use it for logos, stickers, labels and sign artwork. The menus in the top bar (File, Edit, Object, Type, Select, Effect, View, Window, Help), the tool bar on the left, the panels on the right and the shortcuts sit where Illustrator has them. What this version does not do yet is shown greyed in the menus.
At a glance
In one line: a vector drawing app with Illustrator's menus, tools and shortcuts for logos and labels. Works offline.
The screen
- The white sheet in the middle: the artboard (what is printed or exported)
- Tool bar on the left: Selection (V), Direct Selection (A), Pen (P), Type (T), Line (\), Rectangle (M), Ellipse (L), Hand (H), Zoom (Z), the Fill and Stroke swatches
- On the right: the Properties panel, always open, and left of it the icon column (Color, Swatches, Stroke, Gradient, Transparency, Appearance, Layers (F7), Artboards...; a click pops the panel out). Transform / Align / Pathfinder (Shift+F7) and Character / Paragraph (Cmd+T, Opt+Cmd+T) open as floating groups (where Illustrator's Essentials Classic has them)
- The menus in the top bar: File, Edit, Object ... (submenus such as Transform › open at the right)
Task 1. Draw a shape
- Press
Mfor the Rectangle tool (hold it in the tool bar for Rounded Rectangle, Ellipse, Polygon, Star) - Drag on the artboard; Shift-drag makes a square
Xswitches between fill and stroke; click a colour in Swatches
Say: "Open Dohan"
Task 2. Unite or subtract two shapes
- Draw two overlapping shapes and select both with
V(Shift-click) - In Pathfinder (Shift+Cmd+F9) click Unite or Minus Front
- The result is one new path. Cmd+Z if you do not like it
Say: "How do I use Dohan?"
Task 3. Save and export
- File › Save (Cmd+S) writes a
.nvec(Dohan's file) - File › Export › Export As...: SVG, or PNG at 72, 150 or 300 ppi
Say: "Open logo.svg on the desktop in Dohan"
Basics
Vector art is made of points (anchors) and the lines that join them. On a curve, handles sticking out of the anchors set how it bends. Think of nails (anchors) with a thread (the line) pulled around them. The colour inside a shape is the fill, its outline the stroke. Objects stack in layers, top over bottom. What to do now: press M and drag on the artboard to draw a rectangle.
How to use it
- New document: File › New (Cmd+N) sets the artboard (width, height, units pt/px/mm/in) and orientation.
- Select and move: with the Selection tool (
V) click or drag a box around objects, then drag them. Option-drag copies; arrow keys nudge 1 pt (Shift: 10 pt). Drag a corner of the box to scale, outside it to rotate. - Edit points: the Direct Selection tool (
A) drags anchors and handles. - Pen: with
P, a click makes a corner point, a click-and-drag a smooth one. Click the first point to close; Enter or Esc ends the path. - Shapes, lines, type: Rectangle
M, EllipseL, Line\, TypeT(one line where you click). Rounded Rectangle, Polygon and Star are in the shape group; a single click opens the size dialog. - Colour: the Fill/Stroke swatches -
Xbrings the other to the front, Shift+X swaps fill and stroke,Dsets the default (white fill, black 1 pt stroke). Linear and radial gradients in the Gradient panel. - Stroke: weight, cap (butt, round, projecting), corner (miter, round, bevel) and dashes in the Stroke panel.
- Pathfinder, Align, Transform: the 10 Pathfinder operations (Unite, Minus Front, Intersect, Exclude, Divide, Trim, Merge, Crop, Outline, Minus Back), the Align panel (to selection, key object or artboard), Rotate
R, ScaleS, ReflectO(Enter opens the dialog with numbers). - Offset Path and Outline Stroke: Object › Path › Offset Path… takes a distance (negative = inward), joins (miter, round, bevel) and a miter limit and makes a new path behind the original. Object › Path › Outline Stroke turns the stroke into a filled shape (a new path); with a fill, the fill and the stroke become a group. Object › Expand does the same (type becomes outlines).
- Dashes at corners: with Dashed Line on in the Stroke panel, choose "Exact" (from the first anchor, lengths as typed) or "Corners" (a dash across every corner, lengths fitted).
- Area type and type on a path: click with the Type tool (
T) for one line, drag for area type that wraps inside its box. With the Type on a Path tool click a path and the letters follow it (Rainbow). Type › Type on a Path › Options flips it; Type › Area Type Options sets the box. Type › Create Outlines (⇧⌘O) makes one path per letter, grouped. - Undo and view: Cmd+Z / Shift+Cmd+Z; zoom in Cmd++, out Cmd+-, fit artboard Cmd+0, actual size Cmd+1; hold Space and drag to pan; Cmd+Y outline view.
- Several artboards: with the Artboard tool (Shift+O) drag on empty canvas for a new artboard ("Artboard 2"...), drag inside one to move it with its art, drag a corner handle to resize it. Delete removes the active artboard, Esc goes back to the Selection tool. The Artboards panel and the status bar (first, previous, number, next, last) move between them.
- *A tool that is not built yet says it comes in a later version.
How it works
Dohan keeps the drawing's plan, not its dots. Each time the screen shows it, the plan is painted afresh at the current zoom, so there are no jagged steps when you zoom in - like keeping the sheet music and playing it again each time.
The flow: a drag with a tool → anchors and curves recorded in the document → painted on the screen at its zoom → saving writes the plan as it is → only a PNG export turns it into dots at the resolution you chose.
Dohan runs as its own program inside the desktop: if it fails, only its window closes; the other apps and the desktop go on. Your drawings stay on this device; nothing is sent anywhere.
Try it: draw a circle and press Cmd++ several times - the edge stays smooth.
Offset Path and Outline Stroke work the same way: a band of constant width runs along the line (curves stay curves) with pieces at the corners, and the overlapping pieces are merged into one new outline — like cutting out the trace a brush of that width leaves. So the outlined shape covers exactly what the stroke covered on screen.
PNG export paints edges the way Illustrator does ("Art Optimized"), so the picture comes out the same: each pixel is a 4 × 4 grid of small cells and a cell counts if the art touches it at all. That makes edge-rich art such as type look a little (2–5 %) bolder than on screen, which paints exact areas.
Technical details
- Program:
vector(sourceuser/vector/); the desktop's side of the window issrc/gui/vector.c, the same window path (surface, keys, pointer) as Photo Retouch. - Geometry: the vector core shared with Photo Retouch,
user/vcore(double-precision paths, an exact-area rasterizer, strokes, gradients); Pathfinder is a geometric boolean that makes new paths (vc_bool). - Coordinates in pt (1/72 in); 100 undo steps.
- Offset Path, Outline Stroke and dash pieces:
user/vcore/vc_offset.c— fitted offset bands per segment (within 0.05 pt), corner and cap pieces, merged byvc_bool; curves stay curves. - Against Illustrator: star +14 round = its 22 anchors and bounds within 0.0003 pt, rounded rectangle −12 = 8, ellipse ±(12, 20) = 8, outlined zigzag (round) = 19. Align "centre" moves centres to the mean of the objects' centres (as Illustrator).
FAQ
Why are so many menu items grey?
The menus keep Illustrator's places and order from the start; what is not built yet is greyed. Each version turns more of them on.
Can it open .ai files?
This version opens .nvec and .svg. Files other programs exported as SVG open. Opening .ai comes in a later version.
Can I edit letters like shapes?
Type › Create Outlines (Shift+Cmd+O) turns the letters into paths you can edit with Direct Selection and Pathfinder.
If Dohan stops, do I lose other work?
No. Dohan is its own program, so only its window closes. Only an unsaved drawing is lost - press Cmd+S often.
Try this
1. Draw a rectangle
- Press
Mand drag on the artboard.

2. Draw a curve with the Pen
- Press
P, then click and drag to make smooth points; click the first point to close.

3. Look at the layers
F7opens the Layers panel: the eye shows or hides, the lock locks.

Shortcuts
V Selection · A Direct Selection · P Pen · T Type · \ Line · M Rectangle · L Ellipse · R Rotate · S Scale · O Reflect · H Hand · Z Zoom · X / Shift+X / D fill and stroke · Cmd+Z Shift+Cmd+Z · Cmd+C Cmd+X Cmd+V Cmd+F Cmd+B · Cmd+G Shift+Cmd+G · Cmd+8 · Cmd+] Cmd+[ Shift+Cmd+] Shift+Cmd+[ · Cmd+2 Option+Cmd+2 · Cmd+3 Option+Cmd+3 · Shift+Cmd+O · Cmd+A Shift+Cmd+A · Cmd++ Cmd+- Cmd+0 Cmd+1 · Cmd+Y · Cmd+N Cmd+O Cmd+S Shift+Cmd+S Option+Cmd+S. The full table and the score against Illustrator's shortcuts: docs/apps/vector.md.
Settings
Settings › Apps › Dohan: "Light interface" (off by default). It applies the next time Dohan opens.
What it cannot do
This version has no effects or Appearance panel (several fills and strokes), no Image Trace, one artboard only, no opening of .ai or PDF, no printing (greyed in the menus). Type on a path has the Rainbow effect only; area type uses a rectangular box (inside a shape: that shape's box). While editing type on a path the caret shows where the letters would be on a straight line. It runs on the desktop only, not on the phone or the mobile version.
NanumOS 0.1.8349 · 2026-11-16